Service Area

Electrical Supply for Burbank

A full-line electrical and lighting wholesale distributor a straight run west of Burbank, stocked for prewar rewires, panel changes, and commercial tenant improvements alike.

Burbank, CA

Two Kinds of Burbank Jobs, One Counter

Burbank sends us two very different shopping lists. One comes off the old residential blocks — Magnolia Park, the streets north of Olive, the flats below the hills. That housing is prewar and early postwar. Plaster and lath, shallow stud bays, two-wire circuits with no ground, and panels that were sized for a house with one refrigerator in it. The other list comes off the studio lots, post houses, stages, and the office buildings around the Media District, where the work is tenant improvement and the material is commercial-grade from the box out.

We stock for both. A remodeler pulling old-work boxes and GFCI receptacles for an ungrounded kitchen circuit and a TI crew pulling EMT, MC cable, and a pallet of flat panels are buying off the same shelves. Everybody gets wholesale pricing — there is no contractor tier and homeowner tier here.

Getting to us is straightforward. Victory Boulevard runs west out of Burbank into Van Nuys, and Sherman Way is two majors north of it; the 134 west to the 170 north works when Victory is backed up. We open at 6:00am Monday through Friday, so you can load before the first call of the day rather than after it.

Common Burbank pulls

Off the older housing stock

  • Old-work and retrofit boxes, plaster rings, mud rings
  • Arlington and Morris fittings, connectors, and box extenders
  • GFCI and tamper-resistant receptacles from Leviton
  • Romex NM-B and THHN/THWN for rewires and added circuits
  • Siemens load centers, standard, GFCI, and AFCI breakers
  • Meter sockets and disconnects for a service change
  • Grounding rods, clamps, lugs, and bonding hardware
  • First Alert and Kidde smoke and CO detectors

Off the commercial and studio side

  • EMT, PVC, flex, and MC/armored cable
  • Flat panels, troffers, and commercial downlights
  • Lutron and Enerlites dimming, sensors, and controls
  • Intermatic timers and contactor-driven exterior control
  • Lew Electric floor boxes and poke-thru devices
  • LED drivers, low-voltage transformers, and spare power supplies
What Burbank buys most

Three Aisles That Cover Most Burbank Tickets

Older houses, older panels, and commercial spaces getting rebuilt for a new tenant. The material follows.

Storefronts and small commercial

The Corridors Between the Lots

Not every commercial job in Burbank is a stage or a media office. San Fernando Boulevard, Magnolia, and the older strips off Olive turn over constantly — a restaurant becomes a different restaurant, a retail bay becomes a clinic, a shop becomes offices. Those are small-footprint tenant improvements on buildings that were not built for the load, and the material list is short but specific.

Track and monopoint for retail display, recessed adjustables to wash a wall, exterior and sign circuits on Intermatic time clocks or photocells, occupancy sensors where the energy code requires them, and enough dimming to pass a lighting control inspection. We keep those pieces together, and we quote the whole package rather than the fixtures alone.

Color and finish matching

Older Burbank houses get relit a room at a time, which means the new recessed trims in the kitchen have to live next to the ones somebody installed five years ago. Bring the old trim or the model number and we will get you the closest current match on aperture, finish, and color temperature so the ceiling does not read as two different jobs.

The same goes for devices. If a house is half Leviton decora in one finish and half something else, we will tell you what still matches and what has been discontinued. See the brands we stock for what we can pull from, and remember that special orders reach far past that list.

How it runs

Ordering From a Burbank Job Site

01

Send the list

Call it in at (818) 781-0771 or send the takeoff through our quote request form. Catalog numbers, a photo of the old fixture, or a plain description all work.

02

Get a same-day quote

We price the list the same day. If something on it is obsolete, we cross-reference it to a current part instead of sending the sheet back with a hole in it.

03

Pick it up or arrange delivery

Will-call at the Sherman Way counter starting at 6:00am. Delivery can be arranged — ask when you place the order.

04

Special-order the rest

Anything off the shelf gets sourced. We buy from hundreds of manufacturers beyond the 35+ lines we stock.

📍
Counter
13613 Sherman Way, Van Nuys
🕕
Doors open
6:00am Mon–Fri
📞
Phone orders
(818) 781-0771
Common questions

Frequently Asked Questions

Do I need a contractor's license to buy from you?
No. We sell to everyone at wholesale pricing — licensed electricians, general contractors, Burbank homeowners, commercial property owners, and interior designers. There is no separate retail price list.
Can I pick up material before a morning call in Burbank?
Yes. The counter at 13613 Sherman Way opens at 6:00am Monday through Friday. We close at 4:00pm Monday through Thursday and 2:00pm on Friday, and we are closed weekends.
Do you carry Siemens load centers and breakers for panel changes?
Yes. We stock Siemens load centers along with standard, GFCI, and AFCI breakers, plus meter sockets and disconnects. See our panels and breakers page.
Can you match a fixture from an older Burbank building that has been discontinued?
Usually. Bring or send the model number, a photo of the label, or the fixture itself and we will cross-reference it to a current part. If it is not one of our stock lines, we can special order it.
Related categories

Explore More of Our Inventory

Working a Burbank job? Send us the list.

Same-day quotes on materials lists. Call (818) 781-0771 or request a quote online.

Request a Quote
📞 Call Us Now